Difference between revisions of "Automatic pan - DatLab"

Revision as of 08:57, 29 June 2017

high-resolution terminology - matching measurements at high-resolution

Automatic pan - DatLab

Description

Automatic pan (only for real-time data recording) toggles automatic panning on/off by clicking in the O2k status line. If it is on (green), the time range is maintained while the time axis always shows the currently recorded data, i.e. the value of the offset (minimum value) increases as experimental time proceeds. If it is off (yellow), the time axis is static, manual panning is possible (prerss left arrow or right arrow), and the currently recorded data may not be shown on the screen. It does not influence continuous data recording. It is recommended to maintain automatic panning on during the experiment, except for specifically viewing earlier sections of the experiment.

Reference: MiPNet19.18C DatLab-guide

MitoPedia O2k and high-resolution respirometry: DatLab

Revision as of 10:16, 14 August 2016 (view source) Gnaiger Erich (talk \| contribs) ← Older edit	Revision as of 08:57, 29 June 2017 (view source) Gnaiger Erich (talk \| contribs) m (Gnaiger Erich moved page Automatic pan to Automatic pan in DatLab) Newer edit →
(No difference)