Cookies help us deliver our services. By using our services, you agree to our use of cookies. More information

Events - DatLab

From Bioblast
Revision as of 13:40, 29 June 2017 by Gnaiger Erich (talk | contribs) (Gnaiger Erich moved page Events in DatLab to Events - DatLab)


high-resolution terminology - matching measurements at high-resolution


Events - DatLab

Description

An event in DatLab is a defined point in time, labeled by a name (1 to 10 characters). The event is shown by a vertical line in the graph and the label of the event is shown on the top (DatLab 6 and lower: on the bottom). The default name is the sequential number of the event. It is recommended to edit event labels with a minimum number of characters, and to explain the abbrevation in the 'Definition' box. The final concentration and titration volume can be entered into the corresponding boxes, if the event relates to the titration of a substance. A short comment can be entered to describe the event in detail. Manual events are entered (real-time, connected to the O2k) by pressing [F4] at the time of the event. An event belongs either to chamber A, chamber B, or both. Instrumental events are added automatically, e.g. when the stirrer (A or B) or illumination (both chambers) is switched on or off. In events obtained from a selected protocol, the entire sequence of consecutive events is defined with event names, definitions, concentrations and titration volumes.

Abbreviation: F4

Reference: MiPNet19.18C DatLab-guide


MitoPedia O2k and high-resolution respirometry: DatLab