O2k-Videosupport

                  

---

O2k-Videosupport

---

Complementary to the O2k-Manual, the O2k-Videosupport provides valuable assistance.

This cannot replace a careful study of the O2k-Manual.

O2k-start (DatLab 7/Series H)

MiPNet22.11 O2k-FluoRespirometer manual

A DL7 O2k ready to use

A1 DL7 OROBOROS flash drive and DatLab 7 installation

A2 DL7 Start DatLab7

Chamber service Insert O2k Chamber

• O2k-Series H is delivered with the O2k-Chambers mounted. Therefore, mounting is only necessary after removing the glass chamber for a full cleaning service. This is required for regular cleaning the glass chamber.

Chamber service O2k Chamber volume calibration

• O2k-Series H is delivered with volume-calibrated O2k-Chambers. Therefore, volume calibration is only necessary for specific stoppers of the O2k-TPP+ ISE-Module, the O2k-pH ISE-Module, and the O2k-NO Amp-Module.

O2k-start (DatLab 6/Series G)

MiPNet19.18A O2k-Series G: Start

A1 Insert O2k-Chamber

A2 Insert OroboPOS

A3 O2k-Chamber volume calibration

A4 O2k ready to use

POS-service and Chamber-service (all series)

• POS-service

MiPNet19.18B POS-service

B1a OroboPOS from Perspex housing

B1b Disassembly of OroboPOS

B2 Cathode cleaning

B3 Anode cleaning

B4 Membrane mounting

B5 DL7 Insert OroboPOS

---

• Chamber-service

Chamber service Insert O2k Chamber

Chamber service O2k Chamber volume calibration