Difference between revisions of "Polarization voltage"
From Bioblast
Beno Marija (talk | contribs) |
|||
| Line 7: | Line 7: | ||
|mitopedia O2k and high-resolution respirometry=O2k hardware, DatLab | |mitopedia O2k and high-resolution respirometry=O2k hardware, DatLab | ||
}} | }} | ||
{{Technical support integrated}} | |||
== DatLab == | == DatLab == | ||
:::: The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet22.11 O2k-FluoRespirometer manual]]). The default value is 800 mV. | :::: The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet22.11 O2k-FluoRespirometer manual]]). The default value is 800 mV. | ||
Revision as of 10:57, 6 November 2019
- high-resolution terminology - matching measurements at high-resolution
Polarization voltage
Description
A polarization voltage of 600 mV to 800 mV is applied between anode and cathode of the polarographic oxygen sensor, resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.
Abbreviation: U
Reference: MiPNet22.11 O2k-FluoRespirometer manual
MitoPedia O2k and high-resolution respirometry:
O2k hardware,
DatLab
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
DatLab
- The polarization voltage is set in DatLab in the O2k control window [F7] (MiPNet22.11 O2k-FluoRespirometer manual). The default value is 800 mV.
