Talk:O2k-Fluo LED2-Module
From Bioblast
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.
Previous Product ID 34000-01
Older series
O2k Series A to C
- The Oxygraph-2k Series A to C do not support the O2k-Fluo LED2-Module. We thank you for your understanding.
O2k-Fluo LED2-Module, Series A
Setting the LED intensity directly at the Fluorescence-Control Unit Use the small supplied screwdriver to change the position of the switch on the front panel of the O2k-Fluo Control Unit, using the table below:
Position | 0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 |
---|---|---|---|---|---|---|---|---|---|---|
LED current [mA] | off | 0.02 | 0.5 | 1 | 2 | 5 | 10 | 20 | 30 | set by DatLab |
Popular Bioblast page
- O2k-Fluo LED2-Module has been accessed more than
- 50,000 times (2019-12-11)
- 45,000 times (2018-10-18)
- 40,000 times (2016-12-12)
- 30,000 times (2016-01-10)
- 25,000 times (2015-08-20)
- 20,000 times (2014-12-08)
- 15,000 times (2014-06-03)
- 10,000 times (2013-08-08)
- 5,000 times (2012-07-04)
- O2k-Fluo LED2-Module has been accessed more than