Amperometric,Amp: Difference between revisions
From Bioblast
(Created page with "{{MitoPedia |abbr=F7 |description=After selection of the Amperometric, Amp channel in the '''O2k configuration''', an Amperometric, Amp tab will appear in the '''O2k contr...") |
(No difference)
|
Revision as of 15:40, 27 February 2020
- high-resolution terminology - matching measurements at high-resolution
Amperometric,Amp
Description
After selection of the Amperometric, Amp channel in the O2k configuration, an Amperometric, Amp tab will appear in the O2k control [F7] window. Set the desired light intensity (0-1600) in the field ´Fluo intensity´ and the desired amplification of the signal (1-1000) in the field ´Gain for Fluo sensor´in the Amperometric, Amp window followed by a left-click Send to O2k. Switching off the illumination before each fluorometric measurement is routinely required.
Abbreviation: F7
MitoPedia O2k and high-resolution respirometry:
DatLab
