Polarization voltage: Difference between revisions
From Bioblast
No edit summary |
No edit summary |
||
Line 4: | Line 4: | ||
|info=[[MiPNet19.18A O2k-start]] | |info=[[MiPNet19.18A O2k-start]] | ||
}} | }} | ||
{{MitoPedia O2k and high-resolution respirometry | {{MitoPedia O2k and high-resolution respirometry | ||
|mitopedia O2k and high-resolution respirometry=O2k hardware, DatLab | |mitopedia O2k and high-resolution respirometry=O2k hardware, DatLab | ||
}} | }} | ||
== DatLab == | == DatLab == | ||
The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet19.18A O2k-start]]). The default value is 800 mV. | The polarization voltage is set in [[DatLab]] in the [[O2k control]] window [F7] ([[MiPNet19.18A O2k-start]]). The default value is 800 mV. |
Revision as of 10:32, 14 August 2016
Description
A polarization voltage of 600 mV to 800 mV is applied between anode and cathode of the polarographic oxygen sensor, resulting in a current when oxygen is consumed. The current is converted by the electronics to a voltage (raw signal) which must not be confused with the polarization voltage.
Abbreviation: U
Reference: MiPNet19.18A O2k-start
MitoPedia O2k and high-resolution respirometry:
O2k hardware,
DatLab
DatLab
The polarization voltage is set in DatLab in the O2k control window [F7] (MiPNet19.18A O2k-start). The default value is 800 mV.