Template Select fluorescence sensor

Select the Fluo-Sensors

Switching between different excitation wavelengths and filters is achieved by simply exchanging the Fluo-Sensors. Two types of optical sensors are supplied with different LEDs for fluorescence excitation, and the effective spectra of the LEDs are modified by filters.

Select the Fluo-Sensor and filter set from the table on application-specific settings (here we should link to the respective section which is also a template). Each Fluo-Sensor is delivered with a mounted filter set:

1. Fluo-Sensor Green (links to product pages?)Smart Fluo-Sensor Green: 525 nm (dominant wavelength). The installed Filter-Cap is ready for H₂O₂ measurement with Amplex® UltraRed or for measurements of mt-membrane potential with TMRM.
2. Fluo-Sensor Blue (links to product pages?) Smart Fluo-Sensor Blue: 465 nm (dominant wavelength). The installed Filter-Cap is ready for measurements of mt-membrane potential with safranin or Rhodamine 123. A different filter is used for measurement with Magnesium Green™ or Calcium Green™.