MiPNet19.18D O2k-Series G and DatLab 6: Calibration
 |
» 
Oroboros (2015-08-08) Mitochondr Physiol Network
Abstract: Gnaiger E (2016) Oxygen calibration by DatLab 6. Mitochondr Physiol Network 19.18(D04):39-48. » Versions
- Open the pdf document above.
- » Current O2k-series: NextGen-O2k Series XB and O2k Series J
- » Current software versions DatLab 8.0: MitoPedia: DatLab
- Further details: » MitoPedia: O2k-Open Support
• O2k-Network Lab: AT_Innsbruck_Oroboros
Labels: MiParea: Instruments;methods
HRR: Oxygraph-2k, O2k-Protocol
O2k-Core, DatLab, DL6, DL6a7, DL7, SeriesG
DatLab 7
- » DL-Protocol (DLP): O2 calibration air - This DLP provides a guide through an oxygen calibration protocol (air calibration). Version 7 beta: check for or create a folder DL-Protocol on your PC and download the DLP file to this folder. DL-Protocols are functional in DatLab 7 only.
- » Template: O2 calibration List - for quality control with a track record of O2 calibrations.
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
POS calibration
- Static POS calibration = Two-point calibration of the polarographic oxygen sensor.
- DatLab converts the raw signal to oxygen concentrations by applying conversion factors determined during a POS calibration comprising an air calibration and a zero calibration. For each gain a different set of calibration values is necessary. Frequently, assumed hardware problems turn out to be a simple calibration problem. This can easily be detected by observing the Raw signal.
- Dynamic POS calibration = Calibration of the response time of the POS.
