Scaling - DatLab: Difference between revisions
From Bioblast
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
{{Technical | {{Technical support}} | ||
The scaling for the plots in [[DatLab]] can be changed via "Graph" / "Scaling", see the "Guide through the Menues" [http://www.oroboros.at/index.php?id=o2k-datlab-guide| [MiPNet12.07]]. | The scaling for the plots in [[DatLab]] can be changed via "Graph" / "Scaling", see the "Guide through the Menues" [http://www.oroboros.at/index.php?id=o2k-datlab-guide| [MiPNet12.07]]. | ||
| Line 6: | Line 6: | ||
{{#set:Technical service=DatLab|Technical service=O2 signal}} | {{#set:Technical service=DatLab|Technical service=O2 signal}} | ||
[[Category:Technical | [[Category:Technical service]] | ||
__SHOWFACTBOX__ | __SHOWFACTBOX__ | ||
Revision as of 16:01, 5 June 2015
 |
Scaling - DatLab |
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
The scaling for the plots in DatLab can be changed via "Graph" / "Scaling", see the "Guide through the Menues" [MiPNet12.07]. Sometimes the scaling factors may have been changed unintentionally (and unnoticed). In this case O2 flux or other plots may look very uncommon or noisy on the first glance. This will be detected by looking at the absolute values on the right and left axis. It is also possible to revert to standard scalings by selecting one of the pre-installed "Layouts", see [MiPNet12.07].
... more about "Scaling - DatLab"
O2k-Open Support +
