Difference between revisions of "Talk:Run DL-Protocol/Set O2 limit"

Latest revision as of 13:48, 24 March 2020

Popular Bioblast page

Run DL-Protocol/Set O2 limit has been accessed more than

5,000 times (2019-12-16)

DatLab 8 perspectives

We are developing a new DatLab software which will incorporate the current functions of a DL-Protocol plus additional features.

For this purpose, several aspects have to be considered:

The sequence of Events (E) and Marks (M) has to be flexible:

Several events and then a mark (e.g. EEM).

Event without an associated Mark.

Mark without an associated Event.

A DL-Protocol can start with an event or a mark (e.g. SUIT-006_Fluo_mt_D034.DLP): ME, EE, EM, MM

Several marks after a specific event (e.g. EMM).

Automatic marks (have to be defined in a specific DL-Protocol).
Multiple titrations (e.g. 3U*) may require to set a mark after every addition, but only one mark will be the one incorporated in the DL-Protocol (3U). In the current DatLab 7.4, the first mark after the first multiple titration event gets automatically the DL-Protocol name (e.g. 3U). The other marks get free name (i.e. a, b, c, d). Frequently, the first mark is not the one which shoud be selected (for U, it should be the one with higher flux). Therefore, an automatic identification function of the maximum flux for an automatic mark will be a user-friendly feature. Following the same strategy, we could programme this function with other definitions (e.g. mark with the lower flux).
Events are visible in all the plots, however, Marks are visible only in the specific plot.
In Multiple titrations (e.g. 3U*), Marks without a defined "Final conc." and Titration vol." (e.g. 3U) could identify automatically the final "Final conc." and Titration vol." from the respectives Events. This could be applied to other Events and Marks.
In the Multiple titrations Events (e.g. 3U*), can be the "*" automatically updated with the "Final conc." up to this step?

@@ Line 1: / Line 1: @@
-== DL-Protocol editor ==
+== Popular Bioblast page ==
-:::: DL-Protocols are provided by the [[Oroboros contact |Oroboros-Team]]
+::: [[Run DL-Protocol/Set O2 limit]] has been accessed more than
+::::*  5,000 times (2019-12-16)
-:::: The sequence of Events and Marks is edited with names, definitions, concentrations and titration volumes, and instructions. After a protocol is edited and saved under a defined name, the protocol has to be selected and assigned to one or both O2k-chambers.
-::::: A. Instrumental protocols: calibration and instrumental O2 background test
+== DatLab 8 perspectives ==
-::::: B. SUIT protocols: linked to titration solutions
-::::: C. TIP2k-protocols.
+:::: We are developing a new DatLab software which will incorporate the current functions of a DL-Protocol plus additional features.
+:::: For this purpose, several aspects have to be considered:
+::::* The sequence of Events (E) and Marks (M) has to be flexible:
+::::: Several events and then a mark (e.g. EEM).
+::::: Event without an associated Mark.
+::::: Mark without an associated Event.
+::::: A DL-Protocol can start with an event or a mark (e.g. SUIT-006_Fluo_mt_D034.DLP): ME, EE, EM, MM
+::::: Several marks after a specific event (e.g. EMM).
+::::* Automatic marks (have to be defined in a specific DL-Protocol).
+::::* Multiple titrations (e.g. 3U*) may require to set a mark after every addition, but only one mark will be the one incorporated in the DL-Protocol (3U). In the current DatLab 7.4, the first mark after the first multiple titration event gets automatically the DL-Protocol name (e.g. 3U). The other marks get free name (i.e. a, b, c, d). Frequently, the first mark is not the one which shoud be selected (for U, it should be the one with higher flux). Therefore, an automatic identification function of the maximum flux for an automatic mark will be a user-friendly feature. Following the same strategy, we could programme this function with other definitions (e.g. mark with the lower flux).
+::::* Events are visible in all the plots, however, Marks are visible only in the specific plot.
+::::* In Multiple titrations (e.g. 3U*), Marks without a defined "Final conc." and Titration vol." (e.g. 3U) could identify automatically the final "Final conc." and Titration vol." from the respectives Events. This could be applied to other Events and Marks.
+::::* In the Multiple titrations Events (e.g. 3U*), can be the "*" automatically updated with the "Final conc." up to this step?
+[[Category:DatLab 8 perspectives]]