Search results

...nsor is not included.|info= [https://www.oroboros.at/index.php/product/o2k-no-amp-module/ '''Product details and purchase information'''] :::: »[[MiPNet15.05 NO-manual]]

The '''O2k-Fluo Smart-Module''' is an amperometric add-on module to the [[Startup_O2k-Respirometer| O2k-Respirometer]], adding ...ly inserted into the window frame and rotated into final position, leaving no gap between window frame and sensor body.

:::::* O2 & Amp: Oxygen and amperometric channel. ::::# The next step is to observe equilibration of the oxygen signal with a defined gas phase above the stirred aqueous phase ('open') chamber;

...f O₂ flux is as low as 0.5 pmol.s^-1.mL^-1. Signal noise at zero oxygen concentration is <0.05 μM O₂. Oxygen backd :::::: - Pressure transducer, for absolute barometric pressure signal, resolution 0.1 kPa.

...as the primary signal, which is converted to a voltage (volt [V]) the raw signal. The [[O2k-FluoRespirometer]] supports not only the O₂ channel ( ...the primary signal, which is converted to a voltage (volt [V]) as the raw signal. Therefore, the [[O2k-Fluo LED2-Module]] is connected to the Amp plug (up t

== Signal and output == ...to DL8, the primary signal is converted to a voltage (volt [V]) as the raw signal.

...ar calibration between oxygen partial pressure and electric current [Amp] (amperometric mode of operation). The [[OroboPOS]] is the POS applied in the [[Oroboros O ...control parameters] are within the recommended range, the [[OroboPOS]] has no limited period of usage.

::::* Re-attach the Sensor-Guide to the O2k-Front-Fixation. (There is no need to use the fixation screw supplied with early models). ...to the side of the Fluorescence-Control Unit to the ‘Amp’ plugs (labeled "NO" in Series D-E) on the O2k-Main Unit.

== Signal and output == ...Amp)-Channel of the O2k, with electric current (ampere [A]) as the primary signal.

== O2k signal and output == ...nnel of the O2k, with electric potential (volt [V]) as the primary and raw signal

::::* EIC-SMEInst-2018-2020 — SME instrument phase 2, Grant Agreement No. 859770, Oroboros Instruments ::::* Amperometric measurement of nitric oxide: the [[O2k-NO Amp-Module]]