Difference between revisions of "O2k-Open Support alert"

Revision as of 10:50, 26 February 2020

O2k-Open Support alert

We provide service and support based on open innovation

- listed in the Oroboros Ecosystem Agenda 2020

Jan 2020

Jan-31 Fr

Reproducibility committment in high-resolution respirometry: quality control in oxygen calibration

In the DatLab 7.4 software, new instrumental DL-Protocols guide the user automatically step-by-step, to calibrate the instrument accurately. Reproducibility is monitored and documented when following user-friendly standard operating procedures (SOP). Further details in MitoPedia: » Oxygen calibration - DatLab «

Jan-30 Th

Do you check the O₂ flux at the end of the air calibration with the O2k-chamber closed?

In DatLab 7.4, instrumental DL-Protocols guide you automatically towards closing the O2k-chamber after air calibration, to monitor "O₂ slope neg." (negative) as a test of any biological contamination which would increase oxygen consumption in the absence of a biological sample. Further details in MitoPedia: » Oxygen calibration - DatLab «

Do you set mark ‘R1’ and complete the air calibration correctly?

Your air calibration is not effective until you set mark ‘R1’ andclick on Calibrate and copy to clipboard in the O2 calibration window. Further details in MitoPedia: » Oxygen calibration - DatLab «

Jan-24 Fr

Do you write the serial number of the polarographic oxygen sensor (POS) in the ‘O2k configuration’ window?

Including the POS serial number in the ´O2k configuration´ window is important to keep a track record of the sensors used according to the O2k. This will be especially helpful if troubleshooting is needed. » O2k configuration «

Do you perform O2k-Chamber volume calibration?

The volume calibration is essential to ensure that the chamber volume is correctly calibrated to its standard volume of 2 mL (or 0.5 mL for the O2k-sV-Module). » O2k-Chamber MitoPedia «

Do you use the correct O₂ solubility factor (F_M) in the ‘O2 calibration’ window in DatLab?

The O₂ solubility factor varies according to the medium used and influences the air calibration. » Oxygen solubility factor «

@@ Line 12: / Line 12: @@
 *'''Jan-31 Fr'''
 :::: [[Image:O2k-Support.jpg|60px|link=http://wiki.oroboros.at/index.php/O2k-Open_Support |O2k-Open Support]][[File:Yellow-take care.png|40px|Take care]] '''Reproducibility committment in high-resolution respirometry: quality control in oxygen calibration'''
-::::::: In the DatLab 7.4 software, new instrumental DL-Protocols guide the user automatically step-by-step, to calibrate the instrument accurately. Reproducibility is monitored and documented when following user-friendly standard operating procedures (SOP). ''Further details in'' [[MitoPedia: DatLab |MitoPedia]]: »[[Oxygen calibration - DatLab]]
+::::::: In the DatLab 7.4 software, new instrumental DL-Protocols guide the user automatically step-by-step, to calibrate the instrument accurately. Reproducibility is monitored and documented when following user-friendly standard operating procedures (SOP). ''Further details in'' [[MitoPedia: DatLab |MitoPedia]]: » [[Oxygen calibration - DatLab]] «
@@ Line 18: / Line 18: @@
 :::: [[Image:O2k-Support.jpg|60px|link=http://wiki.oroboros.at/index.php/O2k-Open_Support |O2k-Open Support]] [[File:Yellow-take care.png|40px|Take care]] '''Do you check the O<sub>2</sub> flux at the end of the air calibration with the O2k-chamber closed?'''
-::::::: In DatLab 7.4, instrumental DL-Protocols guide you automatically towards closing the O2k-chamber after air calibration, to monitor "O<sub>2</sub> slope neg." (negative) as a test of any biological contamination which would increase oxygen consumption in the absence of a biological sample. ''Further details in'' [[MitoPedia: DatLab |MitoPedia]]: [[Oxygen calibration - DatLab]]
+::::::: In DatLab 7.4, instrumental DL-Protocols guide you automatically towards closing the O2k-chamber after air calibration, to monitor "O<sub>2</sub> slope neg." (negative) as a test of any biological contamination which would increase oxygen consumption in the absence of a biological sample. ''Further details in'' [[MitoPedia: DatLab |MitoPedia]]: » [[Oxygen calibration - DatLab]] «
 :::: [[Image:O2k-Support.jpg|60px|link=http://wiki.oroboros.at/index.php/O2k-Open_Support |O2k-Open Support]] [[File:Blue-info.png|40px|Info: improve]] '''Do you set mark ‘R1’ and complete the air calibration correctly?'''
-::::::: Your air calibration is not effective until you set mark ‘R1’ andclick on <span style="background:lightgrey">Calibrate and copy to clipboard</span style> in the <span style="background:lightgrey">O2 calibration</span style> window. ''Further details in'' [[MitoPedia: DatLab |MitoPedia]]: [[Oxygen calibration - DatLab]]
+::::::: Your air calibration is not effective until you set mark ‘R1’ andclick on <span style="background:lightgrey">Calibrate and copy to clipboard</span style> in the <span style="background:lightgrey">O2 calibration</span style> window. ''Further details in'' [[MitoPedia: DatLab |MitoPedia]]: » [[Oxygen calibration - DatLab]] «
 *'''Jan-24 Fr'''
 :::: [[Image:O2k-Support.jpg|60px|link=http://wiki.oroboros.at/index.php/O2k-Open_Support |O2k-Open Support]]  [[File:Blue-info.png|40px|Info: improve]] '''Do you write the serial number of the polarographic oxygen sensor (POS) in the ‘O2k configuration’ window?'''
-::::::: Including the POS serial number in the ´O2k configuration´ window is important to keep a track record of the sensors used according to the O2k. This will be especially helpful if troubleshooting is needed. ''Further details'' » [[O2k configuration]]
+::::::: Including the POS serial number in the ´O2k configuration´ window is important to keep a track record of the sensors used according to the O2k. This will be especially helpful if troubleshooting is needed. » [[O2k configuration]] «
 :::: [[Image:O2k-Support.jpg|60px|link=http://wiki.oroboros.at/index.php/O2k-Open_Support |O2k-Open Support]] [[File:Red-loss of data.png|40px|Warning: loss of data]] '''Do you perform O2k-Chamber volume calibration?'''
-::::::: The volume calibration is essential to ensure that the chamber volume is correctly calibrated to its standard volume of 2 mL (or 0.5 mL for the [[O2k-sV-Module]]). ''Further details'' » [[O2k-Chamber MitoPedia]]
+::::::: The volume calibration is essential to ensure that the chamber volume is correctly calibrated to its standard volume of 2 mL (or 0.5 mL for the [[O2k-sV-Module]]). » [[O2k-Chamber MitoPedia]] «
 :::: [[Image:O2k-Support.jpg|60px|link=http://wiki.oroboros.at/index.php/O2k-Open_Support |O2k-Open Support]] [[File:Yellow-take care.png|40px|Take care]] '''Do you use the correct O<sub>2</sub> solubility factor (F<sub>M</sub>) in the ‘O2 calibration’ window in DatLab?
-::::::: The O<sub>2</sub> solubility factor varies according to the medium used and influences the air calibration. ''Further details'' » [[Oxygen solubility factor]]
+::::::: The O<sub>2</sub> solubility factor varies according to the medium used and influences the air calibration. » [[Oxygen solubility factor]] «