Difference between revisions of "Volume-Calibration Ring sV"
From Bioblast
(Created page with "{{Product |description='''Volume-Calibration Ring sV''' (A or B), white PVDF, attached to PEEK O2k-Stopper sV. |product...") |
|||
| Line 6: | Line 6: | ||
|product image= <!-- [[Image:Volume calibration ring A+B PVDF for Stopper.jpg|right|180px]] --> | |product image= <!-- [[Image:Volume calibration ring A+B PVDF for Stopper.jpg|right|180px]] --> | ||
}} | }} | ||
__TOC__ | |||
{{Template:Technical support integrated}} | |||
== Technical support == | == Technical support == | ||
::: '''Volume calibration of the [[O2k-Chamber]]''' | ::: '''Volume calibration of the [[O2k-Chamber]]''' | ||
::::* Loosen the stopper fixation rings (A) and (B) with the | ::::* Loosen the stopper fixation rings (A) and (B) with the Allen key. | ||
::::* Follow the instructions in the O2k-Manual: [[MiPNet22.11 O2k-FluoRespirometer manual]] | ::::* Follow the instructions in the O2k-Manual: [[MiPNet22.11 O2k-FluoRespirometer manual]] | ||
::::* Tighten the screws of the fixation rings (A) and (B) gently with the Allen key to ensure that the calibration ring cannot be displaced. Tightening the screw with too much force may damage the thread of the calibration ring. Check for a sufficient fixation by trying to rotate the calibration ring. | ::::* Tighten the screws of the fixation rings (A) and (B) gently with the Allen key to ensure that the calibration ring cannot be displaced. Tightening the screw with too much force may damage the thread of the calibration ring. Check for a sufficient fixation by trying to rotate the calibration ring. | ||
[[Image:Volume calibration ring A+B aluminum for Stopper.jpg|right|400px]] | [[Image:Volume calibration ring A+B aluminum for Stopper.jpg|right|400px]] | ||
Revision as of 11:19, 6 November 2019
Volume-Calibration Ring sV
| Description | Volume-Calibration Ring sV (A or B), white PVDF, attached to PEEK O2k-Stopper sV. |
|---|---|
| Product ID | 3432A-01 or 3432B-01 |
| Type | O2k, Stopper |
| Link | |
| Image |
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
Technical support
- Volume calibration of the O2k-Chamber
- Loosen the stopper fixation rings (A) and (B) with the Allen key.
- Follow the instructions in the O2k-Manual: MiPNet22.11 O2k-FluoRespirometer manual
- Tighten the screws of the fixation rings (A) and (B) gently with the Allen key to ensure that the calibration ring cannot be displaced. Tightening the screw with too much force may damage the thread of the calibration ring. Check for a sufficient fixation by trying to rotate the calibration ring.
- Volume calibration of the O2k-Chamber
