Difference between revisions of "POS-Holder"
Beno Marija (talk | contribs) |
Beno Marija (talk | contribs) |
||
Line 3: | Line 3: | ||
{{MitoPedia without banner | {{MitoPedia without banner | ||
|abbr= | |abbr= | ||
|description=[Image:Pos_holder.JPG|right|180px]]The '''OroboPOS-Holder''' (POS-Holder), made from blue POM, is screwed into the copper block of the [[O2k-Main Unit]], guiding the [[OroboPOS-Connector]] with the [[OroboPOS]] sensor head (POS) to the [[O2k-Chamber]], and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber with the [[OroboPOS-Seal Tip]]. In addition, the OroboPOS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber. | |description=[[Image:Pos_holder.JPG|right|180px]]The '''OroboPOS-Holder''' (POS-Holder), made from blue POM, is screwed into the copper block of the [[O2k-Main Unit]], guiding the [[OroboPOS-Connector]] with the [[OroboPOS]] sensor head (POS) to the [[O2k-Chamber]], and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber with the [[OroboPOS-Seal Tip]]. In addition, the OroboPOS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber. | ||
Two units of this item are standard components mounted on the [[O2k-Main Unit]]. | Two units of this item are standard components mounted on the [[O2k-Main Unit]]. | ||
|info=[[MiPNet22.11 O2k-FluoRespirometer manual|MiPNet22.11]]; [[O2k-OroboPOS-Holder MitoPedia]] | |info=[[MiPNet22.11 O2k-FluoRespirometer manual|MiPNet22.11]]; [[O2k-OroboPOS-Holder MitoPedia]] | ||
}} | }} | ||
Revision as of 16:14, 13 October 2020
POS-Holder |
MitoPedia O2k and high-resolution respirometry:
O2k-Open Support
Description
The OroboPOS-Holder (POS-Holder), made from blue POM, is screwed into the copper block of the O2k-Main Unit, guiding the OroboPOS-Connector with the OroboPOS sensor head (POS) to the O2k-Chamber, and keeping the OroboPOS-Connector in a fixed position for sealing the O2k-Chamber with the OroboPOS-Seal Tip. In addition, the OroboPOS-Holder fixes the O2k-Chamber in an accurate rotational position by pressing against the angular cut of the glass chamber.
Two units of this item are standard components mounted on the O2k-Main Unit.
Reference: MiPNet22.11; O2k-OroboPOS-Holder MitoPedia
MitoPedia O2k and high-resolution respirometry:
O2k hardware,
O2k-Open Support,
O2k-Respirometry,
O2k-FluoRespirometry